Installation
Instructions
¨
TM
Models:
TS345
Square Termination Cap
This chimney termination cap has been tested for use with specific Hearth & Home Technologies Inc. fireplaces. Check with
your local building code agency before you begin installation to ensure compliance with local codes, including the need for
permits and follow-up inspections. If you encounter any problems regarding code approvals, or if you need clarification of
any of the instructions contained here, contact your Hearth & Home Technologies Inc. dealer. For the dealer nearest you,
Note: An arrow (¨) found in the text signifies change in content.
¨
CAUTION
WARNING
Sharp Edges
Fire Risk
•
Wear protective gloves and safety
glasses during installation.
•
Intended for use with a metal chase
top.
Use of combustible materials will cause a
fire hazard.
16"
Minimum
13-1/4 in.
(337 mm)
Open
Top
Field
Constructed
Shroud
Only
16-1/4 in.
(413 mm)
Maximum
Height of 16"
22 in.
(559 mm)
23-1/8 in.
(587 mm)
3" air space
from bottom of
shroud to top
of chase
Roof Chase
18 in.
(457 mm)
18¾"
Minimum
Dimensions for a Field Constructed Shroud
Figure 1
¨
Figure 2
HeatilHearth & Home Technologies Inc. • TS345 Square Termination Cap • 31446 Rev E • 04/07
1
|
Grindmaster Coffeemaker G23 2B User Manual
Grundig CRT Television P37 4501 User Manual
Haier Refrigerator hc125fvs User Manual
Hamilton Beach Iron 14010 User Manual
Hasbro Games 05641 05661 User Manual
Heath Zenith Indoor Furnishings SL 5525 User Manual
Honeywell Thermostat AC 140 7 User Manual
Huffy Board Games isplay Unit User Manual
iHome Computer Keyboard iDM5 User Manual
iLive MP3 Docking Station IHMD8816DTBLK User Manual