INSTALL INSTRUCTIONS C-TCB-30
2000-2005 CHEVROLET IMPALA
TOOLS REQUIRED:
Ratcheting Wrench
Torx Bit Set
Standard Wrench Set
Screwdriver Set
Standard Socket Set
HARDWARE:
QTY DESCRIPTION
PART #
7
7
7
1
2
1
¼-20 x ¾” Hex Head Bolts
¼” Flat Washers
¼” Lock Washers
5/16-18 x 1” Hex Head Bolt
5/16” Flat Washers
5/16-18 Nylock Nut
GSM33001
GSM31005
GSM31026
GSM33012
GSM31006
GSM30017
MAIN COMPONENTS:
QTY DESCRIPTION
Main Seat Base Plate
Telescoping
Pole
1
1
1
1
Main Seat Base Plate
Pole Support Assembly
Cross Brace
Pole Support
Assembly
Telescoping Pole
Cross Brace
SUB ASSEMBLY:
1. Remove Passenger Seat:
• Remove (2) T-50 torx bolts on passenger seat base.
• Disconnect wire plug if vehicle has power seats.
• Remove head rest on passenger seat.
• Angle seat forward and pull back to remove seat, which is held down in the front by
(2) hooks on the floor.
INSTALLATION:
1. Mount C-TCB-30:
• Position Main Seat Base Plate so that square cutouts are positioned where hooks for
seat are located.
• Replace passenger seat sliding hooks into the floor first.
• Replace torx bolts (T-50).
• Mount Pole Support Assembly to Main Seat Base Plate using ¼-20 x ¾” Hex Head
Bolts, Washers and Nuts.
• Attach Cross Brace to Pole Support Assembly using Tab on side of pole and
5/16-18 x 1” Hex Head Bolt, Washers and Nuts.
• Mount Cross Brace on passenger seat using existing hole.
C-TCB-30-INST-9-05
|
Graco Crib 9415 User Manual
Graco Heat Pump 3A0096B User Manual
Greenheck Fan Ventilation Hood FSD 331 User Manual
Grizzly Cordless Sander G0563 User Manual
Grizzly Welder G4173 1 8 HP User Manual
Heath Zenith Door 598 1123 02 User Manual
Honeywell Boiler L7224 User Manual
Hotpoint Washer 9567 User Manual
Husqvarna Lawn Mower 323R User Manual
Impex Fitness Equipment IVT 451 User Manual