Grizzly Switch H8242 User Manual

MODEL H8242

220V/240V ON/OFF

PADDLE SWITCH

INSTRUCTIONS

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

To reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• Only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electrical

specifications/ratings.

• Installation must only be performed by an

Figure 1. h8242 on/oFF paddle switch.

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

Introduction

the Model h8242 features a recessed on (|)

button that can be disabled with a padlock and a

large oFF paddle that ensures fast shut off. the

switch assembly will mount on a standard electri-

cal box, or over a 1" x 2" opening.

• Turn off and completely disconnect all

power sources to the machine before

installing the switch.

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. It is not sealed or rated

for these environments.

Specifications

rated hp..................................................... 2 hp

rated Voltage.....................................220V/240V

rated Current................................................16A

padlock shaft size .........................................³⁄16"

• Make sure there is a verified machine

ground on the circuit this switch is

installed.

WARNINg: NO PORTION OF THIS INSTRUCTION SHEET MAy bE REPRODUCED IN ANy SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF gRIzzLy INDUSTRIAL, INC.

#ts13814 printEd in ChinA